Cylindrical roller bearings are also available in sealed or split designs. In sealed bearings, the rollers are protected from contaminants, water and dust, while providing lubricant retention and contaminant exclusion. This provides lower friction and longer service life. Split bearings are intended primarily for bearing arrangements which are difficult to access, such as crank shafts, where they simplify maintenance and replacements.
Part Number ID OD Width Cage Material Dynamic Load
N 2207 ECM 35 mm 72 mm 23 mm Brass cage, roller centred 69.5 kN
N 207 ECP 35 mm 72 mm 17 mm PA66 cage, roller centred 56 kN
N 207 ECM 35 mm 72 mm 17 mm Brass cage, roller centred 56 kN
NUP 306 ECP 30 mm 72 mm 19 mm PA66 cage, roller centred 58.5 kN
NUP 306 ECNJ 30 mm 72 mm 19 mm PA66 cage, roller centred 58.5 kN
NUP 306 ECML 30 mm 72 mm 19 mm PA66 cage, roller centred 58.5 kN
NUP 306 ECM 30 mm 72 mm 19 mm PA66 cage, roller centred 58.5 kN
NUP 306 ECJ 30 mm 72 mm 19 mm PA66 cage, roller centred 58.5 kN
NUP 2306 ECP 30 mm 72 mm 27 mm PA66 cage, roller centred 83 kN
NUP 2306 ECML 30 mm 72 mm 27 mm PA66 cage, roller centred 83 kN
NUP 2206 ECP 30 mm 62 mm 20 mm PA66 cage, roller centred 55 kN
NUP 206 ECP 30 mm 62 mm 16 mm PA66 cage, roller centred 44 kN
NUP 206 ECML 30 mm 62 mm 16 mm PA66 cage, roller centred 44 kN
NU 306 ECP 30 mm 72 mm 19 mm PA66 cage, roller centred 58.5 kN
NU 306 ECML 30 mm 72 mm 19 mm Brass cage, inner or outer ring centred 58.5 kN
NU 306 ECM 30 mm 72 mm 19 mm Brass cage, roller centred 58.5 kN
NU 306 ECJ 30 mm 72 mm 19 mm Steel cage, roller centred 58.5 kN
NU 2306 ECPH 30 mm 72 mm 27 mm PEEK cage, roller centred 83 kN
NU 2306 ECP 30 mm 72 mm 27 mm PA66 cage, roller centred 83 kN
NU 2306 ECML 30 mm 72 mm 27 mm Brass cage, inner or outer ring centred 83 kN
NU 2206 ECPH 30 mm 62 mm 20 mm PEEK cage, roller centred 55 kN
NU 2206 ECP 30 mm 62 mm 20 mm PA66 cage, roller centred 55 kN
NU 2206 ECML 30 mm 62 mm 20 mm Brass cage, inner or outer ring centred 55 kN
NU 2206 ECJ 30 mm 62 mm 20 mm Steel cage, roller centred 55 kN
NU 206 ECPH 30 mm 62 mm 16 mm PEEK cage, roller centred 44 kN
NU 206 ECP 30 mm 62 mm 16 mm PA66 cage, roller centred 44 kN
NU 206 ECML 30 mm 62 mm 16 mm Brass cage, inner or outer ring centred 44 kN
NU 206 ECJ 30 mm 62 mm 16 mm Steel cage, roller centred 44 kN
NU 1006 30 mm 55 mm 13 mm Brass cage, roller centred 17.9 kN
NJ 306 ECP 30 mm 72 mm 19 mm PA66 cage, roller centred 58.5 kN
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
Page
Previous
Next
English 
Deutsch 
Español 
Português 
Русский 
Italiano